|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#31
|
|||
|
|||
|
Re: pic: 2015/2016 Robot Radio Comparison
Why not buy a decent 5 port switch for $20 and call it a day? It's in a metal box, has lights, is well built inside (I've used these before) and has a very small footprint.
|
|
#32
|
|||||
|
|||||
|
Re: pic: 2015/2016 Robot Radio Comparison
Quote:
It also requires 7.5v, so some extra power work would be required to integrate it onto a robot. Last edited by Mark McLeod : 15-10-2015 at 08:51. |
|
#33
|
|||
|
|||
|
Re: pic: 2015/2016 Robot Radio Comparison
I have one also I looked at the wall wart power unit and mine says 5 volts on it.
Sorry about the weight, I like them because they are really built well. I had forgotten that teams struggle with weight limits. |
|
#34
|
|||||
|
|||||
|
Re: pic: 2015/2016 Robot Radio Comparison
The one you linked is a 7.5v model, so teams just need to be careful of that when spec'ing one out.
|
|
#35
|
||||
|
||||
|
Re: pic: 2015/2016 Robot Radio Comparison
Quote:
http://www.amazon.com/gp/product/B002HH0W5W And it doesn't weigh much. |
|
#36
|
||||
|
||||
|
Re: pic: 2015/2016 Robot Radio Comparison
In the game manual for 2016 Stronghold the use of Open Mesh OM5P-AN is required. However they continue to mention using the extra ports like the switch in the old D-Link DAP1522/DAP825 provided after that.
Does anyone know if adding an Ethernet switch to the robot is legal in 2016? I am picking on this topic because it went directly into adding a switch into the robot at the end of 2015 before Kickoff. |
|
#37
|
||||
|
||||
|
Re: pic: 2015/2016 Robot Radio Comparison
Quote:
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|