|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#31
|
||||
|
||||
|
Re: spud gun/T-shirt gun valve
the sprinkler solenoids are rated for 150 psi
|
|
#32
|
||||
|
||||
|
Re: spud gun/T-shirt gun valve
150PSI gas?
Sprinkler valves are generally only rated for liquids. P.S. It's the valve portion, not the solenoid that's rated for pressure |
|
#33
|
||||
|
||||
|
Re: spud gun/T-shirt gun valve
Quote:
I'm not sure if it was rated for gas and liquid but i know it was 150PSI. Either way it should have the same chance of failing regardless of Air/Liquid. It's just that if it fails with air the results will be much worse. |
|
#34
|
||||
|
||||
|
Re: spud gun/T-shirt gun valve
Compressed air has more energy than compressed liquid. You want to use a valve that's specifically rated for compressed air.
|
|
#35
|
||||
|
||||
|
Re: spud gun/T-shirt gun valve
Compressed gas does have more energy than compressed liquid, but the force exerted on the valve is the same. Pressure is pressure, air just compresses significantly more than liquid so its potential energy under pressure is much greater.
|
|
#36
|
||||
|
||||
|
Re: spud gun/T-shirt gun valve
Quote:
![]() |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|