|
|
|
 If it walks like a duck, and talks like a duck could be a very clever animatronics display created by Disney Imagineers.... Sometimes it is just a duck. - IKE [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| If it walks like a duck, and talks like a duck could be a very clever animatronics display created by Disney Imagineers.... Sometimes it is just a duck. - IKE [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#11
21-10-2015, 13:46
|
|||
|
|||
|
Re: Terminating Resistor CAN
According to my experience the CANBus will have 120Ω across CANH and CANL at each of the ends.
This gives a measured 60Ω between CANH and CANL. When the CAN transceiver in a CAN node drives dominant the transceiver provides high and low voltage across the termination resistors. For bench top use, if your bus is short you can probably get away with just one side terminated. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode