OnlineMetals now stocking 6061 1/16'' 2''x1'' tubing

[Sperkowsky]

This is great!

[tim-tim]

This is great if you only need a small amount.

Brendan did confirm sharp corners in this post.

If you are placing a large order I would still go thru Adam, much better prices. Info can be found here.

[Richard Wallace]

Ordered six 60 inch pieces. With cutting fees and ground shipping to my location the total was just under $100.

[asid61]

Originally Posted by Richard Wallace

Ordered six 60 inch pieces. With cutting fees and ground shipping to my location the total was just under $100.

If you sign up for their mailing list you get 15% off coupons on a regular basis (usually once every month). I get 20% off coupons occasionally too. If you make a lot of orders then you get 20% off on your next order iirc.

[Richard Wallace]

Originally Posted by Richard Wallace

Ordered six 60 inch pieces. With cutting fees and ground shipping to my location the total was just under $100.

My order arrived yesterday in an eight inch diameter tube with plastic end caps. The tube could have held more. Next time I will order ten pieces.

[GeeTwo]

I have placed one order with OnlineMetals so far, for our 2014 summer practice chassis. The order included both C-channel and angle (all aluminum). The C-channel and angle were shipped separately from different locations, and the experience of the two half orders was like night and day. The angle aluminum (far heavier package) came in a 3" inside diameter tube (from Dallas TX?), and it arrived at the house utterly intact. This tube went to our build space, as its inside diameter was perfect to hold a tennis ball for our summer game. The C-channel came in a 2" inside diameter tube from Orlando, FL (I still have this tube in my garage, so I'm sure of the location), and one end of the tube had been blown out in shipping. I haven't seen very much torn strapping tape, but more than half of what I've seen was on that shipment. The metal was all there (it was strapping-taped together), but there was no paperwork inside, as especially contrasted with some rather extensive batch-specific paperwork on the aluminum from Dallas.

[Marcow]

Forgive me if it has already been mentioned, but online metals also has various coupon codes floating around the internet. A quick google search will turn them up. Some are stackable. I believe they have a system where if you order over 100$ worth of materials, you get 10% off. I added another 10% off coupon I found somewhere online and the total order came out pretty cheap.