NVIDIA Jetson TX1

[marshall]

This will be the successor board to the Jetson TK1. Details at the following links:

• http://nvidianews.nvidia.com/news/ti...ots-and-drones
• http://www.engadget.com/2015/11/10/nvidia-jetson-tx1/
• http://www.anandtech.com/show/9779/n...evelopment-kit

Originally Posted by AnandTech Article

NVIDIA will begin taking pre-orders for the dev kit on the 12th with kits to start shipping as soon as the 16th, and will sell for $599 retail/$299 education. The dev kits will contain the module, carrier board, camera board, a heatsink-fan for cooling (which we’re told is grossly overpowered for TX1), and all of the necessary cables. Meanwhile the stand-alone Jetson TX1 module for use in commercial products will go on sale in Q1 of 2016, priced at $299 in 1K quantities.

900 will definitely be buying some.

[Sparky3D]

For anyone interested in the older TK1 boards, NVIDIA is running a promotion and selling them for $99. They are backordered, but it still allowed me to order one.
Link to promo

[marshall]

Originally Posted by Sparky3D

For anyone interested in the older TK1 boards, NVIDIA is running a promotion and selling them for $99. They are backordered, but it still allowed me to order one.
Link to promo

Awesome! I saw that the other day and I didn't think to post about it. Yep, those are great boards! They were also available last year via FIRST Choice. We certainly had fun with ours last year in St Louis.

[sparkytwd]

My biggest issue last year with the TK1 was dead boards. We started with 3, have 1 totally dead and another that will freeze at uboot 90% of the time.

We've used on board computers for 4 years now, these were the first to give us this level of problems. What would be awesome would be for the Shield TV (which also has a TX1) to support Ubuntu with the linux4tegra software stack.

[marshall]

Originally Posted by sparkytwd

My biggest issue last year with the TK1 was dead boards. We started with 3, have 1 totally dead and another that will freeze at uboot 90% of the time.

We've used on board computers for 4 years now, these were the first to give us this level of problems. What would be awesome would be for the Shield TV (which also has a TX1) to support Ubuntu with the linux4tegra software stack.

I think you'll see a port once it becomes available. The price and form factor are hard to ignore for the SHIELD.

[sparkytwd]

Amazon has them for $25 at this moment, I picked one up. It's possible that even without linux (just an android app), this would work well. In my experience I've found the official android builds to be more stable and performant in any case.

[Dan5190]

Supposedly the educational pricing for the TX1 development kit is $299. Has anyone found any information on where/how to get one at this price?

[marshall]

Originally Posted by Dan5190

Supposedly the educational pricing for the TX1 development kit is $299. Has anyone found any information on where/how to get one at this price?

Over on the Nvidia Developer Forums:

https://devtalk.nvidia.com/default/t...s/jetson-tx1/5

Later this week, we will add a link on the site to apply for the EDU discount, either by entering your EDU email address or with instructions provided for registering your organization. After receiving the discount code you will need to enter it during check-out, after which the discount will be applied to your order.

[marshall]

Originally Posted by sparkytwd

Amazon has them for $25 at this moment, I picked one up. It's possible that even without linux (just an android app), this would work well. In my experience I've found the official android builds to be more stable and performant in any case.

Not sure about the $25 pricing but most of the libraries exist for Android and you can do Android development with the SHIELD so that would be a good solution.

[sparkytwd]

Yeah, the Shield is $175 right now on Amazon, making it $125 less than the TX1. CUDA and OpenCV are here: https://developer.nvidia.com/codeworks-android

The one downside is the power is a weird connector at 19 volts/2.1A, so less than ideal on the bot.

[sparkytwd]

Originally Posted by marshall

Not sure about the $25 pricing but most of the libraries exist for Android and you can do Android development with the SHIELD so that would be a good solution.

Whoops, good catch, I meant "$25 off".

[marshall]

Finally got around to making a case for this beast. It should fit any MITX case but wanted to make a custom one: http://www.thingiverse.com/thing:1217209

[pilleya]

The case looks fantastic, it would look great in clear acrylic, or any other colour. Have you thought about making a grill or filter over the fan hole, to prevent swarf and other particulates entering the case?

[marshall]

Originally Posted by pilleya

The case looks fantastic, it would look great in clear acrylic, or any other colour. Have you thought about making a grill or filter over the fan hole, to prevent swarf and other particulates entering the case?

Thanks! I did but I opted to just leave it open for now.