Thunderhex-Tight press bearings?

that....was more far-fetched than the tennis ball I threw for my dog earlier today... - TeknicllyInsane [more]

		Chief Delphi > Technical > Technical Discussion
Thunderhex-Tight press bearings?

Thread Tools

Rate Thread

Display Modes

11-11-2015, 20:20

Munchskull Munchskull is offline

CAD Designer/ Electrical Consaltant

AKA: Anthony Cardinali

FRC #0997 (Spartan Robotics)

Team Role: CAD

Join Date: Jan 2013

Rookie Year: 2013

Location: Corvallis, OR

Posts: 518

Thunderhex-Tight press bearings?

I am currently in the process of deciding whether or not to use Thunderhex on our 2016 robot. I will admit that I am one that likes to save as much money as possible. So while researching thunder hex I found that for a little over a dollar a bearing I could buy some tight press bearings from Vex. The catch is they are 0.01mm under the effective diameter of Thunderhex, making it apparent that they will be a tight fit. My question is does any one have experience with these bearing?

__________________
“In theory, theory and practice are the same. In practice, they are not.” ― Anonymous
Anthony Cardinali
4th year of FRC
Class of 2017

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 16:24.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.