Can Talon SRX Reverse The Slave

[ozrien]

A "slave" CAN Talon SRX can be told to follow the output of ANY other CAN Talon SRX, even Talons that are closed-looping.

Please read section 9. Follower Mode in the Talon SRX Software reference Manual.
http://www.ctr-electronics.com/talon...ical_resources

[GeeTwo]

Originally Posted by ozrien

A "slave" CAN Talon SRX can be told to follow the output of ANY other CAN Talon SRX, even Talons that are closed-looping.

Please read section 9. Follower Mode in the Talon SRX Software reference Manual.
http://www.ctr-electronics.com/talon...ical_resources

While not germane to OP, it says there in section 21.15 that the Reverse Closed-Loop Output option is not available in C++. If you need it while using C++, you can just wire the motor backwards (e.g. red to green on the master and red to white on the slave). If you need to reverse it dynamically, you'll need Java or LV, or an updated version of C++. Note that "wiring one of the motors backwards" can also be used with a single motor controller if using Window/Wiper/Door, AM PG, Bosch, or Snow-Blower motors (according to the 2015 control rules R42, second row of table).

[ozrien]

Originally Posted by GeeTwo

While not germane to OP, it says there in section 21.15 that the Reverse Closed-Loop Output option is not available in C++.

C++ users can absolutely reverse the output of a slave Talon so that is opposite in direction in respect to the master Talon it is following. Section 21.15 describes how to do this.

[GeeTwo]

Originally Posted by ozrien

C++ users can absolutely reverse the output of a slave Talon so that is opposite in direction in respect to the master Talon it is following. Section 21.15 describes how to do this.

The document on-line must be out of date. It begins with:

Originally Posted by 217-8080, top of page 84

21.15. C++: There is no method to reverse the output of a slave Talon SRX.

Edit: Not being a C++ programmer, I skipped on to the Java section. Looking at it now, I see that it is misleading rather than out of date.