Pit Structure Ideas.

[JB987]

Originally Posted by KeeganP

We redesigned our pit this year with the main goals being ease of transport and ease of use, with aesthetics being a close third. We're very happy with the end result, especially when it cost us less than $200 easily. Can be setup to fit within 8x8, 9x8, 9x9, 10x9, or 10x10. Setup time is roughly 10 minutes, and it can be easily modified. I've attached a picture of the setup.

Corners/Connectors: http://tarps.com/chrome2.htm
Pipe (Conduit): http://www.lowes.com/pd_72715-1792-1...=1&Ntt=conduit
Make sure you get the same size pipe as you do connectors so they fit together...

The idea is that the splice connector allows you to build different length poles that connect together to create a total 8', 9', or 10' span, to accommodate every pit size you may encounter. We used (cheap) shower curtain rings (and zipties) to hang banners and awards. Overall we were very happy with this simple and cheap solution that will certainly last for years to come.

Nice alternative to many of the other pits out there. Is the 1" conduit you reference from Lowes actually 1 3/16" OD that the Tarps.com website says is needed?