Show off Your Machining! 2014

[Jared]

Here are a few pictures some neat parts/assemblies on our 15 bot.



https://goo.gl/photos/3S7NUVqLZMdKgeDZ9
https://goo.gl/photos/SVonUkqnnNMD18Py9

The second picture is of our elevator drive transmission, which was designed to be easy to swap out. The entire assembly is mounted on a 1/4" aluminum plate and drops out of the robot with three bolts. Then, the two pieces of square tubing can be unscrewed from the plate. The box on the left has a shaft coupler to allow the versaplanetary to be swapped quickly and the box on the right has a 10:1 worm reduction.