Quote:
Originally Posted by Owen Busler
Lasers. With a plasma or laser cutter this could be made exactly how it is shown.
|
It would still have a radius in the corner due to the laser/plasma diameter.
Also sharp corners represent infinite accell/decell to the machine (which has to ramp up/down). A curve allows the machine to be decelling in one axis while accelling in the other. Will actually reduce runtime appreciable in qty. This is a non-issue on an industrial sized laser, but for a smaller one it will be.
I would much rather educate the audience than dumb-down the game. - dlavery [more] 
11-12-2015, 13:42
Threaded Mode