|
Robo Riot 3418 Practice Chassis
Here is the practice bot that we have been working on for the past few weeks.
The mane frame is 1/8th wall 1 by 2 aluminum. We used 3/16 aluminum/steel rivets. The drive train is three CIMs attached to some 16:1 gearboxes from Andymark. The wheels are the 6 inch omni wheels from vex.
It is not the fastest of robots but it should be great for demos and such. In the future we plane on putting some sort of ball shooting mechanism on top, but for now it will just be the drive train.
|
Throw the programmers (or freshmen with duct tape depending on the state of your robot) in the trailer with the robot for the ride between events. Problem solved. :D - ASD20 [more] 
Threaded Mode