|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#151
|
|||
|
|||
|
Re: New AndyMark products 2016
Yes! The pulleys are being sold separately.
AM part# = am-3298 Edit: http://www.andymark.com/product-p/am-3298.htm Dave |
|
#152
|
|||
|
|||
|
Re: New AndyMark products 2016
I don't see the belts getting sold separately though. Will the tank track belts be sold separately? It would be nice so people could get replacements
|
|
#153
|
||||
|
||||
|
Re: New AndyMark products 2016
Since one of the design parameters seems to have been the ability to replace the belts quickly I'd say that they will eventually offer the belts separately. If you look at the pdfs of it it looks like all that is needed to replace the belt is removal of one stand off and of course loosing up the tensioning turn buckle far enough to get the belt off of one of the end pulleys.
|
|
#154
|
||||||
|
||||||
|
Re: New AndyMark products 2016
Quote:
Quote:
Andy Last edited by Andy Baker : 23-12-2015 at 12:11. |
|
#155
|
||||
|
||||
|
Re: New AndyMark products 2016
Quote:
|
|
#156
|
||||
|
||||
|
Re: New AndyMark products 2016
Some new stuff today:
A crimper for 6Ga lugs: http://www.andymark.com/CrimpTool-p/am-3326.htm An inexpensive, high CV solenoid valve: http://www.andymark.com/Pneumatic-p/am-3324.htm And a really neat shifting PTO "Rocketbox": http://www.andymark.com/PTO-p/am-rocketbox.htm |
|
#157
|
||||
|
||||
|
Re: New AndyMark products 2016
Rocketbox looks really cool. If I wanted a PTO this year that's probably where I would go.
|
|
#158
|
||||
|
||||
|
Re: New AndyMark products 2016
$320 is a little much for a PTO, don't you think?
|
|
#159
|
||||
|
||||
|
Re: New AndyMark products 2016
Not really. Can you point to a comparable product for less?
|
|
#160
|
||||
|
||||
|
Re: New AndyMark products 2016
Not based on the manufacturing cost.
Edit: Cim encoder too! http://www.andymark.com/encoder-p/am-3314.htm Last edited by jman4747 : 30-12-2015 at 17:09. |
|
#161
|
||||
|
||||
|
Re: New AndyMark products 2016
Quote:
|
|
#162
|
||||
|
||||
|
Re: New AndyMark products 2016
It is slightly more expensive than the WCP Shifting gearbox, and the shifting is being allocated to a whole new shaft. It's definitely expensive, but so is everything else in the robot world.
|
|
#163
|
||||
|
||||
|
Re: New AndyMark products 2016
http://www.andymark.com/encoder-p/am-3314.htm
Looks a little pricy when there is already open source 3d printable alternative. |
|
#164
|
||||
|
||||
|
Re: New AndyMark products 2016
Quote:
|
|
#165
|
||||
|
||||
|
Re: New AndyMark products 2016
That is true. It does require you to have a 3d printer. This CIM motor encoder is how ever way more versatile than the 3d printed one due to the fact that you do not loose that much shaft.
Last edited by Munchskull : 30-12-2015 at 19:50. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|