|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#22
|
||||
|
||||
|
Re: GRIZZLY TOOLS
Recently acquired a nice Sieg X2 with the Hoss mods rigged for CNC.
Including the Hoss mill head freak swivel. One caution with Chinese mills sometimes you need to clean up the ways a bit. The existing owner had torn this down and modified every axis so I had no worries as the quality of his work showed it was fine. The X2 as delivered stock might be on the small side so, A nice size mill likely worth looking at is the RF45: http://charteroakautomation.com/our-...nual-bed-mill/ That said there is something to be said for using a Shopbot style router table. You get a larger working area and if mistakes are made typically you cut wood. Quote:
I agree it's a great saw for steel - cheaper than a proper cold saw but gets the job done. Last edited by techhelpbb : 03-01-2016 at 19:04. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|