Go to Post "What's this on the floor? 'Team 71 2005 strategy and design notebook'?" DRAT! I better call Bill and get this in the mail. - Gary Dillard [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 03-01-2016, 15:42
James3245 James3245 is offline
Mentor
FRC #3245 (Ravens)
Team Role: Mentor
 
Join Date: Apr 2013
Rookie Year: 2010
Location: Sandy, Utah
Posts: 39
James3245 is on a distinguished road
Sonic Shifter - recent feedback?

If this year's game warrants a 2-cim shifter we will be considering AndyMark's "Sonic Shifter"

I read some earlier posts (2014). It would be helpful to have recent thoughts from users on how this product has been for:

-ease of assembly/installation
-operation
-reliability over time
-use of encoder (which I understand comes pre-installed)

Thanks!
  #2   Spotlight this post!  
Unread 03-01-2016, 16:03
TylerS's Avatar
TylerS TylerS is offline
Registered User
AKA: Tyler Stark
FRC #1747 (Harrison Boiler Robotics)
Team Role: Mentor
 
Join Date: Apr 2013
Rookie Year: 2011
Location: Indiana
Posts: 64
TylerS will become famous soon enough
Re: Sonic Shifter - recent feedback?

Are you locked into the idea of using the sonic shifter? Vex and West Coast products have options which are better than the sonic shifter in almost every way.
__________________
Purdue University 2019 - Aerospace Engineering
2016 - Team 1747 - Design & Build Mentor
2015 - Team 303 - Coach/Build Captain
2014 - Team 303 - Build Captain
2013 - Team 303 - Driver
2012 - Team 303 - Programming Leader
  #3   Spotlight this post!  
Unread 03-01-2016, 16:10
cbale2000's Avatar
cbale2000 cbale2000 is offline
Registered User
AKA: Chris Bale
FRC #5712 (Gray Matter)
Team Role: Mentor
 
Join Date: Apr 2006
Rookie Year: 2004
Location: Saginaw, MI
Posts: 931
cbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond repute
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by James3245 View Post
-use of encoder (which I understand comes pre-installed)
I do not believe this is accurate. There is an output shaft for an encoder, but I don't think one comes included with the kit.

Beyond that, my 2cents when it comes to 2-speed gearboxes is to give VexPro a look. Their 2 CIM Ball Shifter (or even the 3 CIM Ball Shifter) is lighter than a Sonic Shifter, has a fully enclosed housing to prevent debris from getting into it, shifts more smoothly (in my opinion at least) than a dog gear due to the ball shifting mechanism, and will hold up through a whole season and beyond without any issues (if properly lubricated), and it's fairly easy to use an encoder with. Oh, and VexPro gearboxes are also quite a bit cheaper than AM gearboxes.

I don't have any particular problem with AM gearboxes, but when it comes to comparing two similarly functional and reliable products, lower weight and price always wins for me.

Last edited by cbale2000 : 03-01-2016 at 16:19.
  #4   Spotlight this post!  
Unread 03-01-2016, 20:16
Peyton Yeung's Avatar
Peyton Yeung Peyton Yeung is online now
45 Alumni
AKA: Peyton Yeung
FRC #0461 (Westside Boiler Invasion)
Team Role: Coach
 
Join Date: Mar 2010
Rookie Year: 2009
Location: Kokomo, IN
Posts: 812
Peyton Yeung has a reputation beyond reputePeyton Yeung has a reputation beyond reputePeyton Yeung has a reputation beyond reputePeyton Yeung has a reputation beyond reputePeyton Yeung has a reputation beyond reputePeyton Yeung has a reputation beyond reputePeyton Yeung has a reputation beyond reputePeyton Yeung has a reputation beyond reputePeyton Yeung has a reputation beyond reputePeyton Yeung has a reputation beyond reputePeyton Yeung has a reputation beyond repute
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by TylerS View Post
Are you locked into the idea of using the sonic shifter? Vex and West Coast products have options which are better than the sonic shifter in almost every way.
Would you mind listing what the differences between them are?
__________________
461 Westside Boiler Invasion
2016 Tippy Quarter finalist, Warren Finalist, IN State Semi Finalist,B^3 Double Finalist
2015 Indy Semi finalist, Purdue Quarter Finalist, IN State Quarter Finalist, CORI QF, R2OC Finalist, RAGE Winner
2014 Boilermaker Semi finalist, Crossroads Quarter Finalist, & CAGE Quarter Finalist
45 Technokats
2013 Boilermaker Quarter finalist
2012 CAGE Semi finalist & Queen City Champion
2011 CAGE Quarter finalist & Midwest Semi finalist
2010 CAGE Quarter finalist, Boilermaker Champion, & Washington DC Quarter Finalist
  #5   Spotlight this post!  
Unread 03-01-2016, 20:58
BoilerMentor BoilerMentor is offline
Registered User
FRC #1747
Team Role: Mentor
 
Join Date: Jan 2011
Rookie Year: 2006
Location: West Lafayette, IN
Posts: 130
BoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond repute
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by TylerS View Post
Are you locked into the idea of using the sonic shifter? Vex and West Coast products have options which are better than the sonic shifter in almost every way.
Let me remind you that the very team you're mentoring this year had three, successive failures of the aluminum gears in the final reduction stage on three cim ball shifters. Including a pair of back to back failures that took us out of a one day offseason event we traveled 8 hours round trip for. I can assure you, based on that experience from 2014 we will NOT be using vexpro gear boxes in the drivetrain.
__________________
2006-2008 FIRST Team 1741 Red Alert-Founding Student
2008-2011 FIRST Team 1747 Harrison Boiler Robotics-College Mentor
2012 FIRST Team 4272 Maverick Boiler Robotics-Founding College Mentor
2013-Present FIRST Team 1747 Harrison Boiler Robotics-Engineering Mentor
2015-Present Ri3D Team Indiana - Mechanical and Fabrication
  #6   Spotlight this post!  
Unread 03-01-2016, 21:16
pilleya's Avatar
pilleya pilleya is offline
Elec+Mech
AKA: Alastair Pilley
FRC #4613 (Barker Redbacks)
Team Role: Mechanical
 
Join Date: May 2015
Rookie Year: 2013
Location: Sydney, Australia
Posts: 432
pilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond repute
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by Peyton Yeung View Post
Would you mind listing what the differences between them are?
Both the WCP DS and the AM sonic shifter are dog-shifting style gearboxes.

An encoder can be fitted to the Sonic shifter out of the box, while a WCP DS does not, but a grayhill or CTRE mag encoder on an outer axle or a CIMcoder

In terms of weight the WCP DS, 2.92 Spread Kit with pinions weighs 1.93 lbs. The AM sonic shifter weighs 3.41 lbs with pinions.

The WCP DS is more compact than the Supershifter especially in terms of height.

There are 18 ratio options for the WCP DS. The Super shifter has 8 ratios options, but is capable of much lower gearing because of the inbuilt third stage. The WCP DS comes in a 3CIM version and the 3CIM is compatible with a PTO.

The WCP DS has 7075-T6 gears with teflon infused ceramic coating which is meant to improve efficiency.

Uses lithium grease for lubrication, not the fun red tacky grease as in the Sonic Shifter(because of lack of steel gears)

The Sonic Shifter can use a servo for shifting if required

The 2CIM WCP DS is $227.96 and the Super shifter is $279

Last edited by pilleya : 03-01-2016 at 21:25.
  #7   Spotlight this post!  
Unread 03-01-2016, 21:17
Tom Line's Avatar
Tom Line Tom Line is offline
Raptors can't turn doorknobs.
FRC #1718 (The Fighting Pi)
Team Role: Mentor
 
Join Date: Jan 2007
Rookie Year: 1999
Location: Armada, Michigan
Posts: 2,513
Tom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond repute
Re: Sonic Shifter - recent feedback?

We've used the sonic shifters quite a bit - we used two in our drivetrain and one powering our winch. We had a comp bot and a practice bot, so we had 6 in all.

We abused the one powering our winch to the extreme: we knew we were pushing it FAR beyond the design envelope with the forces were were shifting it under. We upsized the shifting cylinder and removed a stage so we could shift it into neutral. We routinely loaded with with 200-300 pounds and were releasing it.

We expected it to break, and it did. The shifting pin sheared and the dog gear rounded off the ears and the pocketed slots twice during the season.

The drivetrain shifters were installed and used as they were meant to be. The did not fail at all. In the off season we went in and had to change out the dog gears because the ears had rounded off.

We used encoders on them and had no issues.

Used as expected, we would recommend the gearbox to anyone.

Last edited by Tom Line : 03-01-2016 at 21:20.
  #8   Spotlight this post!  
Unread 03-01-2016, 21:18
PurpleInk PurpleInk is offline
Mrs. BoilerMentor
AKA: Betsy Baxter
FRC #1747 (Harrison Boiler Robotics)
Team Role: Teacher
 
Join Date: Jan 2009
Rookie Year: 2006
Location: West Lafayette, IN
Posts: 54
PurpleInk has a brilliant futurePurpleInk has a brilliant futurePurpleInk has a brilliant futurePurpleInk has a brilliant futurePurpleInk has a brilliant futurePurpleInk has a brilliant futurePurpleInk has a brilliant futurePurpleInk has a brilliant futurePurpleInk has a brilliant futurePurpleInk has a brilliant futurePurpleInk has a brilliant future
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by BoilerMentor View Post
Let me remind you that the very team you're mentoring this year had three, successive failures of the aluminum gears in the final reduction stage on three cim ball shifters. Including a pair of back to back failures that took us out of a one day offseason event we traveled 8 hours round trip for. I can assure you, based on that experience from 2014 we will NOT be using vexpro gear boxes in the drivetrain.


Our history with the 3 cim ball shifter:

__________________
FIRST Team 1741 - Student 2005 - 2007
FIRST Team 1741 - Mentor 2007 - 2012

BoilerMentor Asks Me to Join His Alliance
FIRST Team 1747 - Mentor 2012 - Present
Ri3D Team Indiana - 2015 - Present

Last edited by PurpleInk : 03-01-2016 at 21:21.
  #9   Spotlight this post!  
Unread 03-01-2016, 21:19
jeremylee's Avatar
jeremylee jeremylee is offline
Registered User
FRC #1736 (Robot Casserole)
Team Role: Mentor
 
Join Date: Feb 2013
Rookie Year: 2011
Location: Peoria, IL
Posts: 99
jeremylee is a jewel in the roughjeremylee is a jewel in the roughjeremylee is a jewel in the rough
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by BoilerMentor View Post
Let me remind you that the very team you're mentoring this year had three, successive failures of the aluminum gears in the final reduction stage on three cim ball shifters. Including a pair of back to back failures that took us out of a one day offseason event we traveled 8 hours round trip for. I can assure you, based on that experience from 2014 we will NOT be using vexpro gear boxes in the drivetrain.
Hmm, we haven't had any problems at all after 2 regionals and 2 offseasons with our 2014 bot and our 3 cims ball shifters.
  #10   Spotlight this post!  
Unread 03-01-2016, 21:30
Joe Ross's Avatar Unsung FIRST Hero
Joe Ross Joe Ross is offline
Registered User
FRC #0330 (Beachbots)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1997
Location: Los Angeles, CA
Posts: 8,559
Joe Ross has a reputation beyond reputeJoe Ross has a reputation beyond reputeJoe Ross has a reputation beyond reputeJoe Ross has a reputation beyond reputeJoe Ross has a reputation beyond reputeJoe Ross has a reputation beyond reputeJoe Ross has a reputation beyond reputeJoe Ross has a reputation beyond reputeJoe Ross has a reputation beyond reputeJoe Ross has a reputation beyond reputeJoe Ross has a reputation beyond repute
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by cbale2000 View Post
I do not believe this is accurate. There is an output shaft for an encoder, but I don't think one comes included with the kit.
That's not what the Product Page says: Will be shipped with an am-3132 encoder pre-installed.

Quote:
Originally Posted by cbale2000 View Post
I don't have any particular problem with AM gearboxes, but when it comes to comparing two similarly functional and reliable products, lower weight and price always wins for me.
If you consider the included encoder, and the fact that the sonic shifter does ratios that require the 3rd stage on the ballshifter, the price difference is much smaller. $215 for the ball shifter + 40 for an encoder vs 279 for the Sonic Shifter. Weight does favor the ball shifter.
  #11   Spotlight this post!  
Unread 03-01-2016, 21:34
pilleya's Avatar
pilleya pilleya is offline
Elec+Mech
AKA: Alastair Pilley
FRC #4613 (Barker Redbacks)
Team Role: Mechanical
 
Join Date: May 2015
Rookie Year: 2013
Location: Sydney, Australia
Posts: 432
pilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond reputepilleya has a reputation beyond repute
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by PurpleInk View Post
Our history with the 3 cim ball shifter
That looks really nasty, did you contact VEXpro.

I can see why your reluctant to use a ball shifter again
  #12   Spotlight this post!  
Unread 03-01-2016, 21:48
BoilerMentor BoilerMentor is offline
Registered User
FRC #1747
Team Role: Mentor
 
Join Date: Jan 2011
Rookie Year: 2006
Location: West Lafayette, IN
Posts: 130
BoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond repute
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by jeremylee View Post
Hmm, we haven't had any problems at all after 2 regionals and 2 offseasons with our 2014 bot and our 3 cims ball shifters.
Three failures on different drive train sides isn't a coincidence. We ran that drive train hard as you well know (Central Illinois 2014). It was geared aggressively and we used (honestly, inadvertently) down shift motor braking constantly because of our automatic shifting routine in our programming.

It is my belief, the reason for the failure is primarily related to the fact that the shafts that carry the final stage reduction are cantilevered. In looking at the damaged gears it was apparent the failure propagated across the gear teeth, which indicates angular misalignment. That angular misalignment also would have occurred during the periods where the gears were under the highest load.

I do believe that had that stage been steel gears they might have tolerated the abuse, but to me, the ability for the shaft to deflect and allow that angular misalignment is a design flaw. I believe there are a number of features that don't promote a rigid configuration, but the cantilever is the largest problem.

We still use the drive train as a demo robot. We chose to modify the gearbox configuration to eliminate the cantilever and we haven't see another incidence of the failure to date.
__________________
2006-2008 FIRST Team 1741 Red Alert-Founding Student
2008-2011 FIRST Team 1747 Harrison Boiler Robotics-College Mentor
2012 FIRST Team 4272 Maverick Boiler Robotics-Founding College Mentor
2013-Present FIRST Team 1747 Harrison Boiler Robotics-Engineering Mentor
2015-Present Ri3D Team Indiana - Mechanical and Fabrication
  #13   Spotlight this post!  
Unread 03-01-2016, 22:55
James3245 James3245 is offline
Mentor
FRC #3245 (Ravens)
Team Role: Mentor
 
Join Date: Apr 2013
Rookie Year: 2010
Location: Sandy, Utah
Posts: 39
James3245 is on a distinguished road
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by Tom Line View Post
We've used the sonic shifters quite a bit - we used two in our drivetrain and one powering our winch. We had a comp bot and a practice bot, so we had 6 in all.

We abused the one powering our winch to the extreme: we knew we were pushing it FAR beyond the design envelope with the forces were were shifting it under. We upsized the shifting cylinder and removed a stage so we could shift it into neutral. We routinely loaded with with 200-300 pounds and were releasing it.

We expected it to break, and it did. The shifting pin sheared and the dog gear rounded off the ears and the pocketed slots twice during the season.

The drivetrain shifters were installed and used as they were meant to be. The did not fail at all. In the off season we went in and had to change out the dog gears because the ears had rounded off.

We used encoders on them and had no issues.

Used as expected, we would recommend the gearbox to anyone.
This is helpful, thank you. Any other comments from teams with field experience with Sonic Shifter would be helpful. (We are already familiar through direct experience with several options from other vendors) I appreciate the input.
  #14   Spotlight this post!  
Unread 03-01-2016, 23:49
cbale2000's Avatar
cbale2000 cbale2000 is offline
Registered User
AKA: Chris Bale
FRC #5712 (Gray Matter)
Team Role: Mentor
 
Join Date: Apr 2006
Rookie Year: 2004
Location: Saginaw, MI
Posts: 931
cbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond reputecbale2000 has a reputation beyond repute
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by PurpleInk View Post
Our history with the 3 cim ball shifter:
What lubricant were you using and what was the overall reductions in your drive system (including wheel size)?

IMO our 2014 robot put it's 3 CIM Ball shifters through far more abuse than the average team and the gears still look as good as new. For that matter, I've yet to see so much as a chipped tooth on any of the over 75 various Vex Pro gears we've used on competition robots in the past two years.

Quote:
Originally Posted by Joe Ross View Post
That's not what the Product Page says: Will be shipped with an am-3132 encoder pre-installed.
Good catch, not sure how I missed that, I did look at the page. Still getting used to the new AM site layout I guess.

Quote:
Originally Posted by Joe Ross View Post
If you consider the included encoder, and the fact that the sonic shifter does ratios that require the 3rd stage on the ballshifter, the price difference is much smaller. $215 for the ball shifter + 40 for an encoder vs 279 for the Sonic Shifter. Weight does favor the ball shifter.
True the difference is smaller in certain configurations, but still less regardless, and Sonic Shifters doesn't really offer anything the Ball Shifters don't also (save a few gear ratios perhaps), so if you can still save some money and weight, why not?
  #15   Spotlight this post!  
Unread 04-01-2016, 00:41
BoilerMentor BoilerMentor is offline
Registered User
FRC #1747
Team Role: Mentor
 
Join Date: Jan 2011
Rookie Year: 2006
Location: West Lafayette, IN
Posts: 130
BoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond reputeBoilerMentor has a reputation beyond repute
Re: Sonic Shifter - recent feedback?

Quote:
Originally Posted by cbale2000 View Post
What lubricant were you using and what was the overall reductions in your drive system (including wheel size)?

IMO our 2014 robot put it's 3 CIM Ball shifters through far more abuse than the average team and the gears still look as good as new. For that matter, I've yet to see so much as a chipped tooth on any of the over 75 various Vex Pro gears we've used on competition robots in the past two years.
Gear ratios were 18.75:1 and 7.08:1. Gearboxes were lubricated with moly grease containing Teflon. The gearbox direct drove a 6" x 2" wheel at the center of the robot which was chained to the other two wheel in the drive train side, also 6" x 2" wheels. All wheels were treaded with blue nitrile. Center direct drive shaft was supported with a bearing in the outer plate. Two other axles were dead shafts with bearings in the wheel.

The high load situation I believe created the problem was encountered when the driver returned the control stick to a neutral position with the robot at a high speed. The auto shifting code would have immediately tried to shift the robot to low gear with all three cim motors braking.

I've spent a fair amount of time "behind the glass" as it were. I'd challenge you to find a driver who pushed their robot harder and drove more aggressively.

I truly believe that we saw this failure because we pushed the design to its performance limit and shaft deflection leading to angular gear misalignment and ultimately gear tooth failure was the manifestion of that failure. If it had been on only one drive train side or it only happened one time I would write it off as bad luck, but that was not the case.
__________________
2006-2008 FIRST Team 1741 Red Alert-Founding Student
2008-2011 FIRST Team 1747 Harrison Boiler Robotics-College Mentor
2012 FIRST Team 4272 Maverick Boiler Robotics-Founding College Mentor
2013-Present FIRST Team 1747 Harrison Boiler Robotics-Engineering Mentor
2015-Present Ri3D Team Indiana - Mechanical and Fabrication
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 14:56.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi