REV Robotics 2016 Products

[FTC5110]

Hey Greg,
Can you confirm the REV Servo spline is the same as Futaba 3F?
We want to use the Actobotics ServoBlock with them.

https://www.servocity.com/html/servo...b___500__.html

[Greg Needel]

Originally Posted by FTC5110

Hey Greg,
Can you confirm the REV Servo spline is the same as Futaba 3F?
We want to use the Actobotics ServoBlock with them.

https://www.servocity.com/html/servo...b___500__.html

Yes, the Futaba 3F is the same as the REV servo. It is generically referred to as the 25T.

[FTC5110]

Originally Posted by Greg Needel

Yes, the Futaba 3F is the same as the REV servo. It is generically referred to as the 25T.

Great thanks for that. Would you consider adding a replacement gearset for them in the future? No idea if we'll end up with damaged units since we haven't used them in competition but we've repaired a fair few HiTec servos over the years.

[Greg Needel]

Originally Posted by FTC5110

Great thanks for that. Would you consider adding a replacement gearset for them in the future? No idea if we'll end up with damaged units since we haven't used them in competition but we've repaired a fair few HiTec servos over the years.

We will have to take a look at this. I haven't heard of any teams breaking the gears in the servos (because they are all metal vs the plastic ones of other servos) but if it starts to happen, we will make them available.

[FTC5110]

Originally Posted by Greg Needel

We will have to take a look at this. I haven't heard of any teams breaking the gears in the servos (because they are all metal vs the plastic ones of other servos) but if it starts to happen, we will make them available.

For reference we chewed through HS-645MG's far too often with gear tooth failures but never had any issues with HS-755MG. I guess we'll see what happens this season and I'm pleased to see you'd consider gearsets if needed.