|
|
|
 Never, Never tell a prospective mentor what the actual job description is. You need to get them hooked first. :D - BJT [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Never, Never tell a prospective mentor what the actual job description is. You need to get them hooked first. :D - BJT [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#7
08-01-2016, 18:22
|
|||
|
|||
|
Re: Talon SR LED blinks orange momentarily
Follow up.
I found today as I was testing some other code with hobby servos I had the same pause. Turns out with further investigation I had packet loss every 12 seconds in the Diverstation status trend. This matched the pause spot on. With a bit of searching I found others had this issue as well after installing Autodesk Inventor. Yes I just installed this too. I killed the Autodesk update manager and trouble are gone. Used System configuration to disable all Autodesk apps from starting on boot. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode