FRC Field 2016 Download

[inventor_phild]

Here are the links to A360 for the Autodesk Inventor and STEP format files for the FRC field 2016.

FRC Field 2016
http://a360.co/1Rs6VPs
FRC Field STEP 2016
http://a360.co/1UF7R0t

Autodesk Inventor

1. All the parts are grounded in the main assembly. The game allows for the field to be changed, so remove the grounded status from any structures and then move to a new location adding constraints or grounding as required.

STEP

1. The parts will not be grounded when you open the file. When I open a STEP file I ground the parts to get started.

Please let me know if the download works OK. I have tested it and worked for me.

All the best for 2016.

[sanddrag]

Download works fine for me. Thank you for doing this Phil. Much appreciated!

[inventor_phild]

Originally Posted by sanddrag

Download works fine for me. Thank you for doing this Phil. Much appreciated!

Can you email me at phil.dollan@autodesk.com to follow up on the R3 update question.

Thanks

[Chris Endres]

When converting either file to solidworks, it either completely breaks or creates spheres where objects are supposed to be. Can someone convert to solidworks and post a download?

[inventor_phild]

Are you opening the STEP file in SW?

[Chris Endres]

I am opening the step file in SolidWorks, as well as trying to open the Autodesk file and converting it, no luck either way.

[inventor_phild]

OK. Let me try a couple of different work flows and I will get back to you.

[Chris Endres]

Originally Posted by inventor_phild

OK. Let me try a couple of different work flows and I will get back to you.

Ok, thanks!

For reference, this is what opens when I open the STEP file.

[inventor_phild]

Not even close!

[ntrishul24]

Hello Phil,

Is there any word about when the 2016 KOP CAD will be out? We specifically need am14U3 so we can start to play with it.

Thanks!

[inventor_phild]

Glad you asked. Currently uploading!! Check within an hour or 2 for the download link. I will probably start a new thread.

[Chris Endres]

Not sure what CAD program you are using, but here is the link to SolidWorks KOP files.

https://www.solidworks.com/sw/educat...gn-contest.htm

[inventor_phild]

Chris,

If you still need the field model try these formats. One is IGES and the other is STL

http://a360.co/22SQS0G
http://a360.co/1mNAsWl

[alecmuller]

Thanks for doing this!

For what it's worth, the STEP file imported fine for me in SolidWorks 2015 (which I think is analogous to the student version for 2015/16).

Here's a view from the middle driver's station (using the camera and perspective):

[808brick]

Thank You, Greatly appreciated!