Universal Spy Hand Signals

[NShep98]

Originally Posted by JoshWilson

•What robot your talking to: of there are two robotics in the opponent's courtyard, then you need to be able to say which one your talking too. Otherwise, confusion will occur.

My idea for this would be to have three colored cards. Red = team 1, white = team 2, blue = team 3. With one hand, hold the corresponding card, with the other some sort of signal.

Teams are going to have to do a lot of communicating with partners on what signals should be used.

[MikLast]

Originally Posted by NShep98

My idea for this would be to have three colored cards. Red = team 1, white = team 2, blue = team 3. With one hand, hold the corresponding card, with the other some sort of signal.

Teams are going to have to do a lot of communicating with partners on what signals should be used.

This may be a bad idea because:

Refs use the red card and this may confuse the field techs and the refs.

[NShep98]

Originally Posted by MikLast

This may be a bad idea because:

Refs use the red card and this may confuse the field techs and the refs.

That is a valid point. In that case I would either use a different color, or use a card/board that is unmistakably larger than that of the referees.

[SteveDeonarine0]

Originally Posted by MikLast

This may be a bad idea because:

Refs use the red card and this may confuse the field techs and the refs.

True, it could get really confusing and ref might disqualify you