|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Hurling Boulders
What ways has everybody thought of for chucking these things?! The medieval method for throwing boulders is obviously a catapult. Given that you can only control one boulder at a time this method could be viable.
From the prototypes we (The GreenHorns) have done I can say that a wheeled shooter is incredibly effective (so far). We have scuffed up our boulder pretty badly though. Currently we have mini cims in a versaplanetary gearbox at a 1:1 ratio direct driving some 4" high grip wheels from AndyMark. We've found that 3"-4" of compression is getting us the type of launch we want. I'd tell you how far we're launching it, but it keeps hitting the ceiling/walls in our shop (it launches far). Also, how far do you think a high goal scoring robot should be able to launch a ball? Most boulders will probably be scored from right underneath the tower... is a launcher even necessary?! |
|
#2
|
|||
|
|||
|
Re: Hurling Boulders
Boulders are similar to Ariel Assist.
Quote:
|
|
#3
|
||||
|
||||
|
Re: Hurling Boulders
I am curious how a wheeled shooter would change if the skin of the boulder had a hole in it. From looking at ours yesterday, it seems that how quickly the boulders compress is limited by the small hole that vents air out of the side. If a hole was ripped into the skin during game play, it could cause the boulder to compress differently and therefore shoot differently.
|
|
#4
|
||||
|
||||
|
Re: Hurling Boulders
Well given that you can only shoot from their zone it only needs to shoot from about 20 feet max.
|
|
#5
|
||||
|
||||
|
Re: Hurling Boulders
I measured it in CAD and from the floor in the far corner of the courtyard(By the low bar defense) to the top of the high goal is 21 feet(through the air, not distance to the base of the tower), I doubt anybody would want to shoot from the farthest point so I measured from the line in the middle of the courtyard to the high goal and that was just over 10 feet.(again through the air) It is 14 feet from the defenses to the tower. the high goal is 7 feet 1 inch off the floor. So a robot that can shoot 15 feet should be totally fine.
|
|
#6
|
|||
|
|||
|
Re: Hurling Boulders
Quote:
Back to your point, my main point is also, there is a lot more to shooting than compression, but that's what testing is for. |
|
#7
|
|||
|
|||
|
Re: Hurling Boulders
Quote:
|
|
#8
|
||||
|
||||
|
Re: Hurling Boulders
Quote:
As for tears affecting compression, obviously big/noticeable tears will affect it, but at what point will those balls be removed from the field? At $35 a pop I think they'll try to get the most out of them as possible... The GreenHorns ball has some small holes/tears in it from all the prototyping we've done so far, I'll report back if they significantly affect our shot. |
|
#9
|
||||
|
||||
|
Re: Hurling Boulders
They're even closer to the balls from Rebound Rumble. Check out the bots from that year.
|
|
#10
|
|||||
|
|||||
|
Re: Hurling Boulders
"Hurling Boulders"
A new DS&K song? |
|
#11
|
|||
|
|||
|
Re: Hurling Boulders
I think that launching boulders will be similar to 2014, a lot of teams shoot from different spots, and some teams will shoot from right up against the tower. It seems like shooting from against the tower is the safest bet. Just like in 2014, if a layup bot could get up against the low goal, they would score in the high goal. All they have to do is drive a little further, and with the three dividers on the base of the tower, it will be pretty hard to defend against them if they're fast.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|