|
|
|
 It doesn't matter to me where a FIRST local event is held, I'll be there! - Barry Bonzack [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| It doesn't matter to me where a FIRST local event is held, I'll be there! - Barry Bonzack [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
16 Inches vs 14 Inches? -Low Bar Question
So looking at the notes and doing some math, one of my teammates came up with this question:
The low bar's hole is 16 inches, however there is a foot ramp 3 inches tall, and using basic trig, the angled height of entry comes out to be somewhere around 14 inches or so. And give a 2-5 inches for ground clearance, and some wheel diameters, and you're left with basically only an inch or two to work with. Thoughts? 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode