no tensioner 8 wheel belt drive: tooth skip ?

Don't ever give up on your robot, especially this early in the season. That robot is what you make of it. If you give it your all, something good is bound to come your way. - Amanda Morrison [more]

		Chief Delphi > Technical > Technical Discussion
no tensioner 8 wheel belt drive: tooth skip ?

Thread Tools

Rate Thread

Display Modes

14-01-2016, 21:35

Joe G.

Taking a few years (mostly) off

AKA: Josepher

no team (Formerly 1687, 5400)

Team Role: Mentor

Join Date: Sep 2006

Rookie Year: 2007

Location: Worcester, MA

Posts: 1,451

Re: no tensioner 8 wheel belt drive: tooth skip ?

We have run this setup with no failures before. Bearing holes were created via a laser cutter.

__________________
FIRST is not about doing what you can with what you know. It is about doing what you thought impossible, with what you were inspired to become.

2007-2010: Student, FRC 1687, Highlander Robotics
2012-2014: Technical Mentor, FRC 1687, Highlander Robotics
2015-2016: Lead Mentor, FRC 5400, Team WARP
2016-???: Volunteer and freelance mentor-for-hire

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:42.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.