|
|
|
 one wrong move and you could end up capping one of the judges. that will pretty much ruin your chance at judges' award - Mike Ciance [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| one wrong move and you could end up capping one of the judges. that will pretty much ruin your chance at judges' award - Mike Ciance [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
16-01-2016, 19:05
|
|||
|
|||
|
Re: R54 and R69 motor control and PWM servos regards to the MXP port
1 - yes.
Regarding the rest: Servos take more current, and there is not enough current from the RoboRio via the MXP port. According to the description, the WCP Spartan Sensor Board has a dedicated power supply, so that must be able to provide the additional current required to drive servos. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode