C++ Install Issue - Compilers not found...

[euhlmann]

Originally Posted by vettenoir

Where is the toolchain supposed to install? I never got prompted for a location for the software and it installed to backup drive attached to a USB port on my system (I:\frc).

I moved the frc folder to where I wanted it, edited the project properties to match, and the error messages disappeared. I am running Windows 10.

FWIW,

Bob

The installer installs on the drive you run it from. This means that you need to run it from the same drive that eclipse is installed on. That might be @rsaccone's issue.

Also, double check that [eclipse drive]:\frc is on your PATH environment variable.

[vettenoir]

Originally Posted by euhlmann

The installer installs on the drive you run it from. This means that you need to run it from the same drive that eclipse is installed on. That might be @rsaccone's issue.

I never had the msi file on my backup drive on which it installed. There must be something else in the installation script. I did do multiple installs and uninstalls initially, when I couldn't figure where the software had installed. That may have affected its action.

Originally Posted by euhlmann

Also, double check that [eclipse drive]:\frc is on your PATH environment variable.

Good advice. This is what solved the issue for me and would probably solve the issue for @rsaccone

Thanks,

Bob