|
|
|
 resist the hive: As goofy as this may sound, wires do take up weight, several pounds of it. - Rickertsen2 [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| resist the hive: As goofy as this may sound, wires do take up weight, several pounds of it. - Rickertsen2 [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
KOP Window Motor
Hello all, I had a question about the KOP window motors we got this year. In past years we got an older version that had hubs that were somewhat easy to connect to. This year it looked like the upgraded to a newer version, but it has a different output gear. Do they sell hubs to attach to the new window motors? or is our best bet to 3D print some?
Thanks 
|
|
#2
18-01-2016, 09:42
|
|||
|
|||
|
We weren't able to find commercial hubs, but there is a 3D model on Thingiverse that uses the Vex VersaHub hole pattern that we printed and used successfully during prototyping.
http://www.thingiverse.com/thing:269061
|
|
#3
18-01-2016, 10:08
|
|||
|
|||
|
Re: KOP Window Motor
Somewhat related - there is a nice mount on AndyMark for Denso window motors I have not used it, but from past experience, mounting the Denso window motor can be unpleasant.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
