|
|
|
 I know the world needs more engineers, but FIRST isn't all about engineers and robots... that's why it's so great. - Ryan Dognaux [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I know the world needs more engineers, but FIRST isn't all about engineers and robots... that's why it's so great. - Ryan Dognaux [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#12
18-01-2016, 17:17
|
||||
|
||||
|
Re: 2073 Two wheel Boulder chucked prototype
One thing to note is that you are putting a good amount of side loading on these gearboxes when you cantilever the wheel as shown. This is both adding extra resistance which could be why their smoking at the end. If you watch the video closely this flex in the system is also introducing an upward component on the launch. I would suggest possibly supporting the shaft end to reduce side loading and improve efficiency of launch.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode