|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: 8" Pnumatic Wheels @ Andymark soldout
Curious about this as well.
|
|
#2
|
|||||
|
|||||
|
Re: 8" Pnumatic Wheels @ Andymark soldout
Just purchased 6 of the T3 in green and tubes. Was on the phone with Tim discussing the available options and all. Great service and provided a small discount.
|
|
#3
|
|||||
|
|||||
|
Re: 8" Pnumatic Wheels @ Andymark soldout
We have two Vine's in house (and 16 more coming in tomorrow) they work great on the AndyMark Hubs and we have filled them up to around 70psi. I've heard MBS might be out of stock soon on the Vine's. If you look around you can find a wide variety of 200x50 tires, Razor makes a few scooters that use that size tire as well.
|
|
#4
|
||||
|
||||
|
Re: 8" Pnumatic Wheels @ Andymark soldout
The same tire as sold by Andymark (except in black) is used on some smaller scooters and lawn equipment. If it is a Cheng Shin brand 200x50 and has the C-968 tread pattern it will be the same rounded profile, diamond treaded knobby many are still looking for. Our set came from a lawn equipment repair shop.
The black ones are NOT non-marking, meaning your robot will leave skid marks on the floor. http://www.csttires.com/int/lawn-and-garden/c968/ Last edited by electroken : 20-01-2016 at 06:11. Reason: added link |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|