Error when imaging RoboRIO

Let this be a hint to the hardware teams. Deliver that robot early and give the software and driving team time with the robot. IR3 has proven it can be done. - Doug Leppard [more]

		Chief Delphi > Technical > Programming
Error when imaging RoboRIO

Thread Tools

Rate Thread

Display Modes

#10

19-01-2016, 21:42

epylko

Mentor!

AKA: Eric Pylko

FRC #3181 (Pittsford Panthers)

Team Role: Mentor

Join Date: Jan 2011

Rookie Year: 1970

Location: Pittsford, NY

Posts: 45

epylko is an unknown quantity at this point

Re: Error when imaging RoboRIO

Are you upgrading the firmware or the image?

There are two upgrades that have to happen. I think you need to do the firmware first. Instructions are here: http://wpilib.screenstepslive.com/s/...borio-firmware

Firmware is via the web interface. The image file is via the NI tool. I would guess that trying to put the latest image on there without the latest firmware could cause issues.

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 22:31.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.