|
|
|
 Engineering is NOT manufacturing. .... It is good to be able to fabricate things with your own hands, but thats not what engineers do. - KenWittlief [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Engineering is NOT manufacturing. .... It is good to be able to fabricate things with your own hands, but thats not what engineers do. - KenWittlief [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: Question about placement of bumpers
The bumpers need to be in the Bumper Zone, and on the Frame Perimeter.
You gave a height--if that height is to the bottom of your bumpers, you will not be legal, as the top will be OUT of the Bumper Zone (only goes up to 12"). If it's to the top of your bumpers, you'll probably be OK. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
