FIRST Choice round two!

[mastachyra]

My team is getting bumper material, a battery charger, a boulder, a battery tray for the KoP chassis, and cable chain!

Thank you so much to AndyMark for organizing and donating, and to all the generous donors this year!

[MrForbes]

We also get a boulder and bumper material, plus a battery and a couple pneumatic cylinders...along with the sensor board that all teams get.

I second the Thank You AndyMark!

[orangemoore]

We got,

Sensor Board (Accelerometer & Gyro) - 1
Boulder, gray foam ball, 10 in. - 1
12V Battery NP18-12 - 2
Battery Charger - 1
Power (Battery) Charger - 1
Pneumatic Cylinder (fc16-097) - 1

All 150 credits used.

[z_beeblebrox]

We got all of our top items:

1x Sensor Board (Accelerometer & Gyro)
2x RS775 Motor (fc16-132)
1x 12V Battery NP18-12 (fc16-036)
1x Hall Effect Sensor (fc16-131)
2x HS-322HD Servo (fc16-053)

[Taylor]

Drew what we asked for!
1 battery, 1 accelerometer/gyro, 1 9015 motor, 1 bumper material, 1 pocket toner, 1 boulder.
Thanks FIRSTChoicebyandymarkinspires.com! And Jerry!

[Michael Corsetto]

Got a boulder, 2 xbox controllers, a hall effect sensor, and a bunch of cable chain!

Thanks AndyMark!

-Mike

[seg9585]

I'm excited to try out this 10-DOF IMU board!

Also we got another battery, 2 XBox controllers, and hall effect sensor.

[Ryan Dognaux]

Got the Jetson TK1, 2 batteries and a hall effect sensor. Thanks AndyMark!

[RoboChair]

Originally Posted by Michael Corsetto

Got a boulder, 2 xbox controllers, a hall effect sensor, and a bunch of cable chain!

Thanks AndyMark!

-Mike

Cable chain? I hate mounting that stuff.

[Tom Line]

Originally Posted by seg9585

I'm excited to try out this 10-DOF IMU board!

Also we got another battery, 2 XBox controllers, and hall effect sensor.

Me too. I just wish there was a way to get 2 of them. I can't justify integrating a single point of failure into the robot.

[Sperkowsky]

We got
2 1/2 Hex Shaft Collars
1 Boulder
2 Xbox Controllers (really happy about these)
2 Wago Screwdrivers
2 Industrial RJ45 Modular Plugs
8 1/2 Round Shaft Collars
1 Battery Charger (going to be used as a loaner to international teams during NYC)
2 Rolls of Teflon Tape
1 Battery
1 Cylinder

So everything but our Livecam. Not too bad.

[Fauge7]

My team got everything we asked for except bumper material or the voltage regulator module because we burnt out one or two somehow

[Kevin Thorp]

Our team leader has been out sick for a few days.

Can anyone tell me if Bimba pneumatic cylinder or Gates timing belt vouchers are in the Virtual Kit of Parts this year?

It doesn't look like it: http://www.firstinspires.org/resourc...6-kit-of-parts

[scca229]

Originally Posted by Kevin Thorp

Our team leader has been out sick for a few days.

Can anyone tell me if Bimba pneumatic cylinder or Gates timing belt vouchers are in the Virtual Kit of Parts this year?

It doesn't look like it: http://www.firstinspires.org/resourc...6-kit-of-parts

Bimba has a voucher in the kit for 2 cylinders. It is on Page 11 of the Kickoff Kit Gray Tote Checklist.

Gates does not appear to have one.

[dellagd]

We made out pretty well:

1 Sensor Board
1 ADIS16448 IMU (which the credits-to-dollars ratio was insane on btw, thanks Analog Devices!)
2 Xbox Controllers
2 Green light rings
1 12V Battery
2 USB A-to-B cords (For possible programming of RoboRio with the limited ethernet ports on the radio now)
1 Roll of Retro-reflective tape