Question Regarding the Batter Dividers

[Nikademis]

Hey guys,
Just a quick question - for those of you who have already built the batter along with the dividers, does anyone know how much space there is at the narrowest point between the dividers? This would be a huge help.
Thanks!

[MoistRobot]

24 inches

[James Juncker]

the minimum distance between the two dividers is approximately 24" however if you had a shorter robot than the length of the batter you would be able to step short of the end of the batter and have about 28" across from each barrier.

[martin417]

Originally Posted by James Juncker

the minimum distance between the two dividers is approximately 24" however if you had a shorter robot than the length of the batter you would be able to step short of the end of the batter and have about 28" across from each barrier.

Based on the FRC field models, there at least 31 1/2 inches between the dividers....



https://lh3.googleusercontent.com/oodO2Kem49X60RvitU4qzKy4yXmem5YlqCuU2p08kKuxuv5g-T5iLkZc5ZsVwAk08y2VOCMtqpoioL1iQYpfhmeK6BJ8UWjZOSg lgsk11zRncor8z4pUDT6Gd6y0wjH8FhCyXA43vuPbcuRcbyfyv Ibr0wS6WWpMdoNds_15ZUJIAMeqT5OX-UGdA73UBJQZR3FbkdBVQm2n_LGNfD2UfgMij2s1Zg1ewefoMQ1 jBZ2GnHCdwDn0khz8D-gI7R9_ef0y_U4JuAHqkcuurevSDSrv4GRaY--CbqJdve3RXdXqcdBdQUfqTsP0HKSPRQlYCxrKo9HYi7CP38PHL 14x0rX_CuE5iyh5L-ah-LqTmYNrjQPxaykxcJkSfbPhN6mSTPw4WfwmRSaiu8ucrunTNCR LyNAXRhQAGgNv8GCqooAQvpt1ow72nv4YBepa-BWRmMyI8Tr_D1G9YubOV5b_MugEqok3LKZfAdB6AG77l9hJ7Vj 4RSwro9wHWqqSy8AK09ThW6vBMfSWd3mfS7TeI-xHNXaGspRfFOtLn5O_fBFzA5FuRNXWeEqaP9QYsqrO5UdP=w14 41-h728-no

[James Juncker]

I was including bumper width and excluding it from the robot dimensions. If I re add the 6 inches from both sides bumpers i would be at about 30" at the end. I also think that I forgot where the barriers ended at and that they have a gap before the tower. But thank you for the correction, I didn't mean to provide false information

[Hallry]

Originally Posted by martin417

Based on the FRC field models, there at least 31 1/2 inches between the dividers....

https://lh3.googleusercontent.com/oodO2Kem49X60RvitU4qzKy4yXmem5YlqCuU2p08kKuxuv5g-T5iLkZc5ZsVwAk08y2VOCMtqpoioL1iQYpfhmeK6BJ8UWjZOSg lgsk11zRncor8z4pUDT6Gd6y0wjH8FhCyXA43vuPbcuRcbyfyv Ibr0wS6WWpMdoNds_15ZUJIAMeqT5OX-UGdA73UBJQZR3FbkdBVQm2n_LGNfD2UfgMij2s1Zg1ewefoMQ1 jBZ2GnHCdwDn0khz8D-gI7R9_ef0y_U4JuAHqkcuurevSDSrv4GRaY--CbqJdve3RXdXqcdBdQUfqTsP0HKSPRQlYCxrKo9HYi7CP38PHL 14x0rX_CuE5iyh5L-ah-LqTmYNrjQPxaykxcJkSfbPhN6mSTPw4WfwmRSaiu8ucrunTNCR LyNAXRhQAGgNv8GCqooAQvpt1ow72nv4YBepa-BWRmMyI8Tr_D1G9YubOV5b_MugEqok3LKZfAdB6AG77l9hJ7Vj 4RSwro9wHWqqSy8AK09ThW6vBMfSWd3mfS7TeI-xHNXaGspRfFOtLn5O_fBFzA5FuRNXWeEqaP9QYsqrO5UdP=w14 41-h728-no

For some reason this image works on my phone, but I get a 'forbidden' error when trying to view it on my laptop...any chance you could upload this image as an attachment to your post?

[martin417]

Originally Posted by Hallry

For some reason this image works on my phone, but I get a 'forbidden' error when trying to view it on my laptop...any chance you could upload this image as an attachment to your post?

OK, how's this?

[Hallry]

Originally Posted by martin417

OK, how's this?

Perfect, thanks!