|
|
|
 Don't let the teams here be so much of an intimidation to you, but instead, an inspiration. They all had to start from the beginning, too. - Amanda Morrison [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Don't let the teams here be so much of an intimidation to you, but instead, an inspiration. They all had to start from the beginning, too. - Amanda Morrison [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
roboRIO Not Communicating Until Reset
We seem to be having an odd quirk with our roboRIO. When we first power on our electronics board, the FRC driver station does not establish communication with the roboRIO. However, after pushing the reset button on the roboRIO, the driver station establishes communication once it is booted up. We have had to do this reset every time our electronics board is power cycled. Any ideas on what could be causing this would be greatly appreciated.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode