|
Re: We're building 20 sets of bumpers...
We heat press our numbers. Vinyl runs about 2 buck for four sets of numbers. Cutting takes a machine that can do it, we use a vinyl cutter or our schools laser engraver. That takes around 10 minutes to cut all four sets. Pressing takes around ten minutes using a t-shirt press.
If you don't have the equipment it would be costly to start. But once you have that stuff you can make a lot of cool things with a laser, vinyl cutter, and heat press.
__________________
Andrew Basse
Coach - FRC Team 3572 - Wavelength
|
Every robot needs a locky-thingy. A robot without one might fire when it isn't supposed to, and hit the wrong target; e.g., a referee, FTA, or robot inspector. - Richard Wallace [more] 
21-01-2016, 06:32
Threaded Mode