|
|
|
 The most important deisgn criteria is always performance in any of the parts / systems we design. But we do try to abide by the saying -- if it doesn't look good (right), it probably isn't good (right). - Adam Freeman [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: roboRIO Not Communicating Until Reset
Are you connecting through the new radio or directly to the roboRIO?
|
|
#2
21-01-2016, 08:02
|
|||
|
|||
|
Re: roboRIO Not Communicating Until Reset
When it is being non-communicative, I have some diagnostics that will help us figure it out.
Please click to the second DS tab and see what the ping LEDs look like. Also look on the third tab to see that the team number is correct. Click on the arrow next to the team number and see if your robot shows up. Shift-click on the arrow and see if the robot name shows up then. Finally, go to a web browser and enter in roboRIO-team-frc.local where team is your team number and see if the browser can connect. Please report the results along with what type of interface you were using, USB, enet, wifi. If using USB, also use 172.22.11.2 in the web browser and see if that works. Also, what type of laptop, vendor and OS? Greg McKaskle
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
