|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: FRC 1444: Week 2 Shooter Prototype
Is that cause there is a mentor with his hand directly on the prototype not wearing safety glasses?
|
|
#2
|
||||
|
||||
|
Re: FRC 1444: Week 2 Shooter Prototype
I hope so. "You'll shoot your eye out" literally comes to mind. Look extremely powerful guys good job! Now comes the hard part of implementing it on a robot.
|
|
#3
|
|||
|
|||
|
Re: FRC 1444: Week 2 Shooter Prototype
Quote:
|
|
#4
|
||||
|
||||
|
Re: FRC 1444: Week 2 Shooter Prototype
Is that just one CIM without a gearbox?
|
|
#5
|
|||
|
|||
|
Re: FRC 1444: Week 2 Shooter Prototype
It's actually two Mini CIMs connected directly to two 6" rollers. Compression is about 1", but we are still tweaking that. Currently, we have a bit too much slippage which is likely due to running the motors flat-out. Like I said, though, we wanted to overdo it at first then dial it back as necessary.
|
|
#6
|
|||||
|
|||||
|
Re: FRC 1444: Week 2 Shooter Prototype
Quote:
Looks awesome so far though, let us know if you guys need anything! |
|
#7
|
|||
|
|||
|
Re: FRC 1444: Week 2 Shooter Prototype
All right, here's another one. We actually can make a shot from robot height at the proper distance.
https://www.youtube.com/watch?v=HWvjXWZpycg |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|