GRIP Co-processor bandwidth usage

[nightpool]

Originally Posted by BrianAtlanta

We're looking at using GRIP on a co-processor, headless since we can't publish the feed to the DS (due to DS restrictions), we wanted to make sure that the video wasn't leaving the bot. It's how I believed it would work, but another mentor had some concerns. Just didn't want to rely on what I thought.

I believe SmartDashboard has a tool that allows you to view the camera feed, if you want to look into that.

[cad321]

It sounds like op is asking if sending information from their co-processor will take up bandwidth to the same extent sending your video stream to the driver station would. We all know that sending a live camera feed back to the driver station has the possibility to put you over the bandwidth limit. However I believe the main appeal of using the co-processor for vision on the robot itself is that it won't eat up your bandwidth.

The 7mb/s limit is from the radio on the robot to the driverstation. Not local co-processor to radio to local roborio. Please correct me it I'm wrong though.