|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
|
||||
|
||||
|
Re: PDP Lights are flashing Orange
I did check those manuals I linked for you.
I would take the system to its simplest configuration. In this case, setup the RoboRio and PDP. Disconnect everything else. If the error still exists then reimage, update all the firmware, drop in some generic code. After that, you might have to get FRC involved. Is this a new PDP with old PCM or visa versa? All new or old? There are many variables and you need to simplify as much as possible to ease in troubleshooting. If all else fails, the PDP could be failing, as one of the manuals mentions that this error condition can indicate a hardware failure. Perhaps there is a team close that is willing to try your PDP or lend you one of theirs. Good luck with this. If you are still stuck keep on posting. Aloha! |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|