PDP Lights are flashing Orange

[TikiTech]

Did you do all the previous suggestions?

Is it setup with only the RoboRio and PDP?
Are the Can cables installed properly?
Is the termination jumper set correctly?
What firmware revision is installed on the PDP? RoboRio?
Browser you are using to access the RoboRio webdashboard?

You might want to read through the links I posted earlier. This one specifically http://wpilib.screenstepslive.com/s/...ribution-panel

You will want to look at what sticky fault is being logged to help narrow down what the issue is.

Post some screen shots of the self test results.

Hope this gets going for your soon.

[Slade]

We fixed it! Thanks everybody!

[Jon Stratis]

Originally Posted by Slade

We fixed it! Thanks everybody!

So, what was the fix? Others may run into a similar problem, and a detailed posting of the root cause and what you did to fix it could help them a lot. Simply posting that it's suddenly magically fixed doesn't really help everyone else.

[Slade]

Originally Posted by Jon Stratis

So, what was the fix? Others may run into a similar problem, and a detailed posting of the root cause and what you did to fix it could help them a lot. Simply posting that it's suddenly magically fixed doesn't really help everyone else.

Well so at first the double-clicking self test on the PDP didnt work, so I re-imaged the roborio and pressed the self test rapidly for about 10 seconds and it was green.

[TikiTech]

Originally Posted by Jon Stratis

So, what was the fix? Others may run into a similar problem, and a detailed posting of the root cause and what you did to fix it could help them a lot. Simply posting that it's suddenly magically fixed doesn't really help everyone else.

Agreed!

Especially after many went through multiple efforts to help.

It's what many of us are on here to do, so please post what the resolution was.

We love to learn too.

Glad its going,

Aloha

P.S. We will be at the Orlando Regional and I would like to stop by your pit and see what you have accomplished.

[Slade]

Originally Posted by TikiTech

Agreed!

Especially after many went through multiple efforts to help.

It's what many of us are on here to do, so please post what the resolution was.

We love to learn too.

Glad its going,

Aloha

P.S. We will be at the Orlando Regional and I would like to stop by your pit and see what you have accomplished.

Unfortunately I wont be at the orlando regional because I'll be in New York for a few days, but I'm sure you'll be able to ask anyone on my team and they'll show you everything you wanna know!

[TikiTech]

Any chance you are going to post what resolved the problem?

This will be helpful to others as well as inform us that our troubleshooting was sufficiently helpful.

Thank you