Tapping into 3D Printed Parts

What else could you do with a t-shirt? Wait... never mind... I retract my previous statement and realized this is FIRST and we can do anything with anything. ;) - Jeremiah Johnson [more]

		Chief Delphi > Technical > Technical Discussion
Tapping into 3D Printed Parts

Thread Tools

Rate Thread

Display Modes

#21

27-01-2016, 21:54

MrBasse

Registered User

FRC #3572 (Wavelength)

Team Role: Coach

Join Date: Jul 2011

Rookie Year: 2010

Location: Norton Shores, MI

Posts: 669

Re: Tapping into 3D Printed Parts

Could you run a hex hole in the opposite side of your part and then place a nut in that hole? We used this for a camera mount where the nut was press fit into a hole and it allowed the bolt to thread through from the other side.

__________________
Andrew Basse
Coach - FRC Team 3572 - Wavelength

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 23:36.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.