Quote:
Originally Posted by Joe Derrick
|
I looked at the datasheet for that connector and it appears that the overall width (the long side of the connector) for a 10 pin connector is 14.34mm, and the
datasheet from CTRE has it at 10.58mm. You will probably be able to file off the ends and get it to work though.
I believe that
this connector is a lot closer, if not the same connector as the ones from CTRE or VEX. The width is 10.58mm.
We were trying to decide what to use our digikey voucher on, and now we know what we will get.
Robotics is my football! - Nemo [more] 
29-01-2016, 10:44
Threaded Mode