Roborio comms with arduino over USB

[RyanN]

Originally Posted by The Doctor

Recently I've been experimenting with sending status codes to an Arduino from the RoboRio. I've so far tried toggling serial from the MXP to the arduino, and serial over USB between them. Neither of these have worked yet. I was wondering if any teams had input on how to send single byte status packets?

Current robot code (java):

arduino = new SerialPort(19200,SerialPort.Port.kUSB);
...
byte mode1 = 0;  //////// 0b<red><blue><fms><auton><teleop><disabled><enabled><attached>
				if (ds.getAlliance() == DriverStation.Alliance.Red)  mode1 |= 0b10000000;
				if (ds.getAlliance() == DriverStation.Alliance.Blue) mode1 |= 0b01000000;
				if (ds.isFMSAttached())                              mode1 |= 0b00100000;
				if (ds.isAutonomous())                               mode1 |= 0b00010000;
				if (ds.isOperatorControl())                          mode1 |= 0b00001000;
				if (ds.isDisabled())                                 mode1 |= 0b00000100;
				if (ds.isEnabled())                                  mode1 |= 0b00000010;
				if (ds.isDSAttached())                               mode1 |= 0b00000001;
				
				byte[] mode2 = {mode1};
				arduino.write(mode2, 1);

The problem is that the instantiation of the SerialPort object causes the robot code to error and restart. The exact error can't be copied out of the DS, but it's something along the lines of this:

RuntimeException: HAL: -VISA: Resource not found at [SerialPortJNI.serialInitializePort]

Has anyone gotten Rio-to-Arduino comms to work using Serial?

I got it working. I never tried an Uno or Mega, but the Pro with the FTDI USB to Serial does work. The Uno or Mega might work, but the Uno clone using a CH340 or CH341 USB to Serial did not work.