|
Retro Reflective Tape Dimension's Wrong?
According to the manual:
Each of the high GOALS is marked with three (3) strips of 2 in. retro-reflective material (3M 8830 Silver Marking Film) to form a u-shaped target. The targets are 1 ft. 2 in. tall and 1 ft. 8 in. wide.
The CAD drawing from FIRST has the tape as 12 in. tall
I know that the field drawings should supersede the manual, but I'm surprised no one else has brought this up. We need to know what the actual dimensions are so that we can do the math for our vision tracking correctly. Do other team's CAD models show the same?
__________________
2016 (mentor/drive-coach)
Quarter-Finalist-Einstein, Winner-Carson Division Champs, Winner-10K Lakes, Chairman's Award-10K Lakes, Finalists-Lake Superior,
Winner-MSHSL Robotics Competition
2015 (mentor/drive-coach)
Finalists-10K Lakes, Finalists-Lake Superior, Finalist-MSHL Robotics Competition, Quarter-Finalist-Galileo Division Champs
2014 (mentor/drive-coach)
Winner-10K Lakes, Winner-Lake Superior Winner-MSHSL Robotics Competition, Quarter-Finalist-Galileo Division Champs
2013 (mentor/drive-coach)
Winner-10K Lakes, Winner-Lake Superior, Winner-MSHSL Robotics Competition, Quarter-Finalist-Newton Division Champs
2012 (mentor/drive-coach)
Finalists-Lake Superior, Semi-Finalist-MSHSL State Championship, Semi-Finalists at 10,000 Lakes
2008-2011 (college mentor)
2007 (driver)
Quarter Finalist-Milwaukee
|
Instead of lowering a team's expectations, let's raise the amount of competitive resources available to them. ;) - artdutra04 [more] 
Threaded Mode