Low Bar

[Ryan Dognaux]

Originally Posted by Rangel(kf7fdb)

The difference is that you had squarish robots parkng in a squarish space. This year the park and shoot area is a trapezoid which will make it easier for defenders to turn you so you miss. That said, there are ways to minimize the defenders defense. Such as a turret shooter or a trapezoidal robot.

Speaking of which, has any team ever made a trapezoid robot?

Depending on the width of your frame plus your bumper height, you could still square yourself up using the polycarbonate lane dividers on the batter. You just need to be able to shoot very close to the tower. See the attached picture.

[AllenGregoryIV]

Originally Posted by Ryan Dognaux

Depending on the width of your frame plus your bumper height, you could still square yourself up using the polycarbonate lane dividers on the batter. You just need to be able to shoot very close to the tower. See the attached picture.

From that picture it still looks like a defnder could twist you around if they hit one of your back corners. Also the polycarbonate will flex some meaning you aren't in exactly the same position every time.

[mrwright]

Originally Posted by Ryan Dognaux

Depending on the width of your frame plus your bumper height, you could still square yourself up using the polycarbonate lane dividers on the batter. You just need to be able to shoot very close to the tower. See the attached picture.

This is a little off topic of the low bar but this diagram brings up an interesting point. If this robot is up on the batten scoring and a defensive robot parks perpendicular behind it and the offensive robot cannot push it out of the way is it still considered a pin? I imagine that teams may have trouble with traction due to the batten material.

I haven't seen an official pinning definition in the Q&A yet. Does it count as a pin to just park there and hold them if we don't initiate contact?

[laplacier]

Originally Posted by mrwright

This is a little off topic of the low bar but this diagram brings up an interesting point. If this robot is up on the batten scoring and a defensive robot parks perpendicular behind it and the offensive robot cannot push it out of the way is it still considered a pin? I imagine that teams may have trouble with traction due to the batten material.

I haven't seen an official pinning definition in the Q&A yet. Does it count as a pin to just park there and hold them if we don't initiate contact?

I'd like to know this as well.

[mrwright]

Originally Posted by laplacier

I'd like to know this as well.

I just posted this question to the Q&A. We'll see what they say...

https://frc-qa.firstinspires.org/Que...sive-robot-par

[Monochron]

Originally Posted by mrwright

I just posted this question to the Q&A. We'll see what they say...

https://frc-qa.firstinspires.org/Que...sive-robot-par

Off topic, but why do people keep calling the Batter, Battens? Us the Batter similar to ship battens or something like that?

[ghesla]

Originally Posted by mrwright

I just posted this question to the Q&A. We'll see what they say...

https://frc-qa.firstinspires.org/Que...sive-robot-par

Answered, and as most of us expected, will be pinning.

[Ryan Dognaux]

Originally Posted by mrwright

I haven't seen an official pinning definition in the Q&A yet. Does it count as a pin to just park there and hold them if we don't initiate contact?

I'd be surprised if it wasn't pinning / trapping. Especially once the robot makes a move to leave that area.

Originally Posted by AllenGregoryIV

From that picture it still looks like a defender could twist you around if they hit one of your back corners. Also the polycarbonate will flex some meaning you aren't in exactly the same position every time.

Agree that the polycarbonate would flex some. It definitely isn't as nice as 2014's corner shot but we're hoping it'll be good enough.

[FrankJ]

Originally Posted by mrwright

This is a little off topic of the low bar but this diagram brings up an interesting point. If this robot is up on the batten scoring and a defensive robot parks perpendicular behind it and the offensive robot cannot push it out of the way is it still considered a pin? I imagine that teams may have trouble with traction due to the batten material.

I haven't seen an official pinning definition in the Q&A yet. Does it count as a pin to just park there and hold them if we don't initiate contact?

I not sure how good of a defensive strategy that is. The match is effectively 2 on 2, but the rest of the court is left wide open for the other robots to score. and if you are not clear of the court yard in the last 20 secs of the match, you risk big penalties.

[IronicDeadBird]

Originally Posted by mrwright

This is a little off topic of the low bar but this diagram brings up an interesting point. If this robot is up on the batten scoring and a defensive robot parks perpendicular behind it and the offensive robot cannot push it out of the way is it still considered a pin? I imagine that teams may have trouble with traction due to the batten material.

I haven't seen an official pinning definition in the Q&A yet. Does it count as a pin to just park there and hold them if we don't initiate contact?

I'm not a ref or part of the GDC but my understanding is that pinning is defined as one robot not being able to move at all from a location.

[rich2202]

Originally Posted by mrwright

If this robot is up on the batten scoring and a defensive robot parks perpendicular behind it and the offensive robot cannot push it out of the way is it still considered a pin?

2 years ago, anything that prevented an opposing robot from moving away was considered pinning/trapping. Using the same definition, the situation described would be considered a pin.