|
|
|
 For Pete's sake, don't concentrate on the entry itself... concentrate on what your team is doing to make an impact in your community. - Andy Baker [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| For Pete's sake, don't concentrate on the entry itself... concentrate on what your team is doing to make an impact in your community. - Andy Baker [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: pic: Group 1 Design
Really neat and clean design.
One question: Bumpers- How are you mounting them? 
|
|
#2
02-02-2016, 15:39
|
|||
|
|||
|
Re: pic: Group 1 Design
I really like your design, but how are you planning on moving your mechanism with the window motor? How high does it go? What are you planning to use it for?
|
|
#3
02-02-2016, 15:46
|
||||
|
||||
|
Re: pic: Group 1 Design
Looks pretty sweet! But, like a couple others are asking: are bumpers going to be a problem?
|
|
#4
02-02-2016, 16:00
|
||||
|
||||
|
Re: pic: Group 1 Design
So...This isn't our actual design. This was one of three designs that we presented to our community at the end of week 1. The community felt that we were sacrificing too much and dedicating ourselves to shooting with this design and sort of rejected it.
As for the shooter, we are currently using 2 mini - cims and plan on shooting from a dedicated spot on the field. Testing using our prototype has been relatively reliable. We are also now focused on scoring in the low goal. For that our prototype works really well. Edoga
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
