RoboRIO Re-image Error-80041CF0(Error Code)

[Mike_inno]

Hi,

This is Mike from Team 5879. Our team hit an unexpected power down when re-imaging roboRIO, and then it indicates some error occured during firmware update. The error code is 80041CF0.

Some infor shown as follows:
1) firmware: 3.0.0f0
2) os: NI linux Real-time ARMV7-A 3.14.40-rt37-ni-3.0.0f2
3)status: Safe mode(Software error)
4)roboRIO image version: FRC_roboRIO_2015_v23

Could anyone help show how to get it fixed?

Thanks,
MIKE

[otherguy]

The only time I've encountered problems during flashing was when I was attempting to flash over Ethernet cable.

Are you connected via USB per the instructions?
http://wpilib.screenstepslive.com/s/...borio-firmware

[Mike_inno]

Thanks.

Yeah, We are connecting roboRIO with USB cable, but re-image always fails.

[Greg McKaskle]

Losing power with flashing HW is rarely a good thing. If you don't get it going, please contact NI using info from ni.com/frc.

Greg McKaskle

[Mike_inno]

Thanks Greg. will try to ping NI to see if there is any way to get it work.