Glue shaft on back case of CIM motor

[MrForbes]

Hopefully it'll work!

If you think that is simple, wait till you see our robot...I only hope it works...

[hardcopi]

We are using a string pot to keep track of the angle of the shooter. We should be able to know the angle of the shooter that way.

Gluing onto the motor just doesn't feel like a good idea overall. It will work, but during competition it might come loose on a violent fall from a tower for instance.

[sanddrag]

Keep in mind, that part of the motor gets extremely hot.

[MrForbes]

On a drive motor, yeah, it'll get hot. On a shooter motor that has very little load, it should not get hot.

[Al Skierkiewicz]

Am I missing something? The back of the CIM motor does not have a shaft so to attach an encoder you would have to modify the case. R30 is very specific about what allowed mods can be made to motors and drilling into the case is not allowed.

[GeeTwo]

Originally Posted by Al Skierkiewicz

Am I missing something? The back of the CIM motor does not have a shaft so to attach an encoder you would have to modify the case. R30 is very specific about what allowed mods can be made to motors and drilling into the case is not allowed.

They are not trying to determine the rotation of the shaft, but of the enclosure/housing.

[Dad1279]

string-pot wrap string around case of cim, and mount String-pot nearby?

http://www.andymark.com/product-p/am-2674.htm

[philso]

How are you going to mount the body of the encoder? If the axis of rotation of the encoder is not exactly lined up with the axis of rotation of the object you are measuring, the forces will break the glue joint as the assembly rotates. If exact alignment cannot be guaranteed, it would be best to use some compliant coupling between the encoder shaft and the component being measured.

It might be easier for you to measure the rotation of some other point in your system. If you are using a motor with a gear or sprocket to rotate the assembly, attach your encoder to the shaft of that motor or to the shaft the assembly rotates on.

[seg9585]

It sounds like a better idea to mount the encoder to the worm drive shaft itself.