NVIDIA Jetson TX1

[sanelss]

Originally Posted by dusty_nv

With Jetson TX1 + ZED, I get 15 FPS out of the box (in HD mode) with the ZED SDK Depth Viewer tool. I often run it through a USB3 hub with the keyboard/mouse attached to that. Here's a link to ZED SDK for JTX1: https://www.stereolabs.com/download_....9.2_alpha.run

Regarding your keyboard/mouse mini-PCIe USB setup, have you tried using the USB OTG port (normally used for flashing). With the converter you can plug USB2 peripheral(s) into it.

Best regards,
Dustin

I was not aware that was an otg port, if it is I guess I could try that too.

the tk1 gets 5-7fps with the depth viewer on 720p so it sounds like the tx1 is ~3x faster with that type of load(assuming by hd you mean 720p rather than any of the higher resolutions). certainly an improvement but not as much as one would hope and the other question is if it's worth spending $300 for that...... corrupt frames are still an issue though so it may be worth the upgrade just to mitigate that issue...