RoboRio Communication Issues

[The_Waffleing]

Originally Posted by Mark McLeod

1. First, test using the radio Ethernet port closest to the power connector it's labeled POE.
2. Which of the Driver Station ping indicators are showing green on the Diagnostics tab?
3. Are both the Driver Station Communications and Robot Code lights red?
4. What are the Ethernet status lights doing on the roboRIO?
5. Can you browse to the roboRIO over USB and check the IP address it is using?
   

1. Robot Radio and Robot are show green in the ping indicators
2. No, Communications is green while Robot Code is red
3. When communicating over wifi, the yellow LED quickly flashes while the green LED is solid
4. I have done that but when I attempted to connect to the RoboRio via Labview, I would still get the same communication error as to when I remained in 802.3af.
5. Yes the two IPs that it has listed are 10.7.53.95 and 172.22.11.2