Help. Could Someone Explain the Vision Examples on the Tutorial (#8)

[Lorenzo334]

Hello,

Here are the program pictures, you asked for.

[Greg McKaskle]

It looks like your Begin VI tries to write to a global variable called Robot Mode. Normally, the variable would exist in the Robot Global, but it is made available so that your code knows whether it is running auto or tele. Many robots don't need this, and if you select the constant and the global and delete them. I can't tell if you have any other issues, but this may be the only one.

Greg McKaskle

[Lorenzo334]

Thank you,

Our head programmer is currently out and we just needed some help. If we have any more questions we might continue to post on this thread or make a new one.

Thank you, again.

Team 4063
TRiKzR4kiDz
Programming

[Lorenzo334]

Hello,

Sorry to be bugging again but I seemed to send you a wrong picture of a partial code, here is the correct one. Sorry I should of checked the photos before sending.

If you have the time, I'm sure is the same problem with the same solution, but I just want to check.

[Greg McKaskle]

It is caused by the same problem. But you only need to delete the global variable write node. The Robot Mode global that has the dashed line hooked up ti it. If the broken wire remains, you can press Ctl-B to automatically delete the broke wires.

Greg McKaskle

[Lorenzo334]

Thank you again,

Mr. McKaskle, we appreciate your time to answer this problem. I'm pretty sure we get everything finalized, with your help.

Thank you, so much again,

Team 4063
TRiKzR4kiDz
Programming

"Most of us are waiting. We're waiting for something interesting to happen. And I think we're going to wait forever if we don't do something more interesting with our lives." Donald Miller

[Greg McKaskle]

You are welcome. Hope to see you guys in San Antonio.

Greg McKaskle