|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#9
|
|||||
|
|||||
|
Re: How the 15 inches is measured
Well no, they don't usually. But they're usually close enough for most purposes. I mean, if you have a 6WD with a center drop, then the frame isn't going to be properly parallel to the ground either. Which is a fun thing to consider. Frame perimeter is defined relative to how the bot "normally" rests on the ground, but what does that mean if it rocks?
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|