|
|
|
 I'm sure you can come up with something, with a bit of warped thought!
... and if not, warped thinking is what your team's Engineers are for! :) - kmcclary [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I'm sure you can come up with something, with a bit of warped thought!
... and if not, warped thinking is what your team's Engineers are for! :) - kmcclary [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
04-02-2016, 23:24
|
||||
|
||||
|
Re: Bad PWM cables?
As you have said, it is very coincidental that all 6 wires would be considered 'bad'. If it was the same motor controller for each wire I would definitely check that it was connected properly.
If the controllers are receiving no input it may even be a code issue. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode